I.Necessity of Upgrading

【可过滤标签前】The deep integration of cloud computing, AI, and 5G is driving exponential growth in global data traffic. Traditional 100G networks increasingly reveal bandwidth bottlenecks, struggling to meet demands for high throughput and low latency. Therefore, upgrading data center networks to 400G has thus become a strategic imperative to to accommodate future business expansion and ensure system performance.【可过滤标签后】【换行】

II.Advantages of Upgrading to 400G Networks

2.1 Fourfold Increase in Throughput

【可过滤标签前】400G optical modules doubles single-port bandwidth, delivering a four-fold increase over 100G. This transformation not only significantly enhances network transmission capacity but also enables data centers to more readily handle high-bandwidth scenarios, reserving ample space for future business evolution.【可过滤标签后】

2.2 Doubled Port Density

【可过滤标签前】Traditional 100G switches typically utilize a 1U form factor with 32 QSFP28 ports. In contrast, next-generation 400G switches employ a 2U size and can provide up to 64 QSFP-DD ports. This means a doubling of port count, with each port operating at four times the original speed.【可过滤标签后】

2.3 Enhanced Performance

【可过滤标签前】400G modules enable higher signal rates and lower processing latency, optimizing performance for massive parallel communication.【可过滤标签后】

2.4 Optimized Resource Utilization

【可过滤标签前】By consolidating multiple 100G links into fewer 400G connections, data centers can reduce physical interfaces/cables, simplifying topology and decreases cabling complexity. Such architectural streamlining not only minimizes potential failure points but also effectively lowers power consumption and thermal management demands.【可过滤标签后】【换行】

III.100G vs 400G Optics

3.1 Single-Channel Rate Enhancement

【可过滤标签前】100G Modules typically use 4×25G NRZ modulation (4 channels at 25Gbps each), achieving a total throughput of 100Gbps. 【可过滤标签后】【可过滤标签前】400G Modules adopt 8×50G PAM4 or 4×100G PAM4, delivering breakthroughs in both channel count and per-channel data rate for higher throughput.【可过滤标签后】

3.2 Cost-per-Bit Advantage

【可过滤标签前】While 400G modules have a higher unit price than 100G, they offer lower cost per bit transmitted. As production scales and technology matures, per-bandwidth costs continue to decline, making 400G more economical for large-scale deployments (e.g., major cloud service providers, supercomputing centers).【可过滤标签后】

3.3 Modulation Technology Evolution

【可过滤标签前】100G primarily relies on NRZ (Non-Return-to-Zero) while 400G widely adopts PAM4 (Pulse Amplitude Modulation with four levels). PAM4 transmits twice the information of NRZ within the same bandwidth. Despite higher SNR (signal-to-noise ratios) requirements, advanced DSP algorithms ensure stable performance in high-speed links, making PAM4 the foundation for 400G+ rates.【可过滤标签后】

3.4 Backward Compatibility

【可过滤标签前】100G QSFP28 modules typically support downward compatibility with 40G speeds. 400G QSFP-DD modules offer greater flexibility, supporting 200G, 100G, and even 40G links.【可过滤标签后】【换行】

IV.400G Ethernet Optics

4.1 400G QSFP-DD Optical Module

Type	Distance	Fiber Type	Channels	Interface	Use Case
SDR	≤50m	Multimode	4x	MPO-12/APC	Intra-rack server/switch links
SR8	≤100m	Multimode	8x	MPO-16/APC	High-density rack interconnects
DR4	500m	Single-mode	4x	MPO-12/APC	Intra-DC spine-leaf backbone
FR4	2km	Single-mode	4x/8x	LC Duplex	Campus/cross-building DCI
LR4/LR8	10km	Single-mode	4x/8x	LC Duplex	Metro DCI
ER4/ER8	40km	Single-mode	4x/8x	LC Duplex	Long-haul inter-city DCI
ZR	80km+	Single-mode	Coherent	LC Duplex	Ultra-long-haul backbone

4.2 400G QSFP-DD DAC (Direct Attach Cable)

Direct-Connect: 400G QSFP-DD to QSFP-DD DAC for short-distance interconnects between same-rate devices.
Breakout: Supports 400G-to-2x200G and 400G-to-4x100G, flexibly adapting to aggregation connections in leaf-spine architectures.
Key Features: Max length: 3m (copper-based, no optical conversion). Zero power consumption, minimal heat generation. Cost-effective alternative to optical modules, ideal for intra-rack or adjacent-rack connections.

4.3 400G QSFP-DD AOC (Active Optical Cable)

400G QSFP-DD to QSFP-DD AOC
400G QSFP-DD to OSFP AOC
Breakout AOC: 400G-to-4x100G
Key Advantages: Range: 1–100m (overcoming copper DAC limitations). Low latency and superior EMI resistance. Ideal for cross-rack/zone high-speed interconnects, bridging the gap between the distance shortcomings of DACs, serving as an ideal choice for medium-distance connections.

【可过滤标签后】【换行】

V.Migration Solutions: 100G → 400G

5.1 400G QSFP-DD SR8 + MPO-16 APC Fiber Patch Cords

Applicable Scenarios: Short-distance, high-density multimode environments (e.g., intra-data center interconnects).
Key Components: 400G QSFP-DD SR8 optical modules; MPO-16 APC trunk fiber cables.
Advantages: 【可过滤标签前】a.Cost-effective, ideal for budget-sensitive projects.【可过滤标签后】【可过滤标签前】b.Future-proof: Existing MPO-16 cabling can be reused for 800G upgrades, avoiding reinvestment.【可过滤标签后】【可过滤标签前】c.Easy maintenance and standardized deployment.【可过滤标签后】

5.2 400G DR4 + 100G DR + MPO-LC Breakout Cabling

【可过滤标签前】Applicable Scenarios: Phased upgrades, heterogeneous network coexistence environments.【可过滤标签后】【可过滤标签前】

Design: Upgrade core/spine switches to 400G (using 400G QSFP-DD DR4 modules) , while leaf layer switches retain 100G (using 100G QSFP28 DR modules). Use MPO-LC breakout cables for rate adaptation.
Advantages: a.Gradual migration, reducing upfront costs and risks. b.Boosts backbone bandwidth without replacing access-layer devices.【可过滤标签后】【换行】

VI.Conclusion

【可过滤标签前】In summary, the transition from 100G to 400G is no longer a question of “whether” but “how to execute efficiently”. This leap is not just about speed—it’s a holistic evolution in architecture, resource utilization, and sustainable development capabilities.【可过滤标签后】

Our Products

Get In Touch

Aicplight