Our environment is pretty sensitive to link stability, so we went with the APC to APC version. This AICPLIGHT cable has not triggered any odd retransmission alarms, and the link runs quietly.
MPO-8 (Female APC) to 2x MPO-4 (Female APC) OS2 Single mode Elite Breakout Cable,8 Fibers,Plenum (OFNP) , Yellow
P/N: S2-8F-MPOA-2MPOA SKU: 40501
US$46.00
Cable Types:
- S2-8F-MPOA-2MPOA MPO-8 APC to 2x MPO-4 APC,OS2
- M4-8F-MPOA-2MPOA MPO-8 APC to 2x MPO-4 APC,OM4
- M4-16F-MPOA-2MPOA MPO-16 APC to 2x MPO-8 APC,OM4
- M4-16F-MPOA-2MPOU MPO-16 APC to 2x MPO-8 UPC,OM4
Length:
1m (3ft)
3m (10ft)
5m (16ft)
10m (33ft)
15m (49ft)
20m (66ft)
30m (98ft)
40m (131ft)
50m (164ft)
Length Price Table
| Length | Price |
|---|---|
| 1m (3ft) | US$46.00 |
| 3m (10ft) | US$47.00 |
| 5m (16ft) | US$48.00 |
| 10m (33ft) | US$51.00 |
| 15m (49ft) | US$54.00 |
| 20m (66ft) | US$57.00 |
| 30m (98ft) | US$63.00 |
| 40m (131ft) | US$68.00 |
| 50m (164ft) | US$74.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- 8-to-4 Fiber Breakout
- 100% Fiber Utilization
- Plug-and-Play Installation
- Ultra-Low Insertion Loss
- 100G/400G/800G Transmission Support
- High-Density Cabling Systems
Specifications
| Connector A | MPO-8 APC Female | Connector B | 2x MPO-4 APC Female |
|---|---|---|---|
| Fiber Count | 8F to 2 x4F | Fiber Mode | OS2@9/125μm |
| Flame Rating | OFNP | Cable Outside Diametre | 3.0mm |
| Polarity | Generic | Attenuation | 0.35dB/km@1310nm 0.20dB/km@1550nm |
| Insertion Loss | ≤0.35dB | Return Loss | ≥60dB |
| Operating Temperature | -10 to 70°C (14 to 158℉) | Storage Temperature | -20 to 70°C (-4 to 158℉) |
/
Certification
Compare Items
| MPO-8 (Female APC) to 2x MPO-4 (Female APC) OS2 Single mode Elite Breakout Cable,8 Fibers,Plenum (OFNP) , Yellow |  MPO-8 (Female APC) to 2x MPO-4 (Female APC) OM4 Multimode Elite Breakout Cable,8 Fibers,Plenum (OFNP) , Magenta |  MPO-16 (Female APC) to 2x MPO-8 (Female APC) OM4 Multimode Elite Breakout Cable,16 Fibers,Plenum (OFNP), Magenta |  MPO-16 (Female APC) to 2x MPO-8 (Female UPC) OM4 Multimode Elite Breakout Cable,16 Fibers,Plenum (OFNP) , Magenta | |
|---|---|---|---|---|
| Connector A | MPO-8 APC Female | MPO-8 APC Female | MPO-16 APC Female | MPO-16 APC Female |
| Connector B | 2x MPO-4 APC Female | 2x MPO-4 APC Female | 2x MPO-8 APC Female | 2x MPO-8 UPC Female |
| Fiber Count | 8F to 2 x4F | 8F to 2 x4F | 16F to 2 x8F | 16F to 2 x8F |
| Fiber Mode | OS2@9/125μm | OM4@50/125μm | OM4@50/125μm | OM4@50/125μm |
| Polarity | Generic | Generic | Generic | Generic |
| Attenuation | 0.35dB/km@1310nm 0.20dB/km@1550nm | 2.3dB/km@850nm 0.6dB/km@1300nm | 2.3dB/km@850nm 0.6dB/km@1300nm | 2.3dB/km@850nm 0.6dB/km@1300nm |
| Insertion Loss | ≤0.35dB | ≤0.35dB | ≤0.35dB | ≤0.35dB |
| Return Loss | ≥60dB | ≥45dB | ≥45dB | ≥20dB |
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
What does MPO-8 to 2×MPO-4 mean in actual cabling?
The MPO-8 end carries 8 fibers, which are split into two 4-fiber MPO branches. This allows one high-density parallel interface to be divided into two separate optical paths.
Is this cable the same as an OM4 multimode breakout cable?
No. This is an OS2 single-mode cable, identified by its yellow jacket, and it is intended for single-mode optics. It should not be mixed with OM3 or OM4 multimode modules.
What should I check during installation?
Verify the MPO-8 and MPO-4 port layout, keep the breakout legs protected from pulling, and clean all APC end faces before connection. For plenum areas, confirm that the OFNP jacket meets the project requirement.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionUsed it for a short 400G breakout connection to multiple ports, and the connector orientation and branch labels were easy to follow. The installers did not waste much time figuring out which end went where.
Our previous cable was too stiff, and I always worried about the bend point when closing the rack door. These jumpers are more flexible and sit naturally in the cable manager.