How does the MPO Harness Cables category split an 8-fiber MPO interface into duplex LC connections?

It splits one female MPO-8 interface into four LC Duplex UPC branches. Each listed model uses 8 fibers and Type B polarity for parallel-to-duplex optical breakout connections.

What is the main difference between S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU?

The fiber type and MPO polish are different. S2-8FB-MPOA-8DLCU is OS2 single-mode with a female MPO-8 APC connector, while M4-8FB-MPOU-8DLCU is OM4 multimode with a female MPO-8 UPC connector.

Can S2-8FB-MPOA-8DLCU support QSFP28-to-SFP28 and QSFP+-to-SFP+ optical breakout links?

Yes. S2-8FB-MPOA-8DLCU supports 100G QSFP28 to 4x25G SFP28 or 40G QSFP+ to 4x10G SFP+ breakout links when the connected modules use compatible OS2 single-mode MPO and LC interfaces.

Can M4-8FB-MPOU-8DLCU be used for 100G or 40G multimode breakout connections?

Yes. M4-8FB-MPOU-8DLCU connects one female MPO-8 UPC parallel interface to four LC Duplex UPC branches for OM4 multimode 100G-to-4x25G or 40G-to-4x10G breakout links.

Can S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU be used interchangeably in the same MPO Harnesses Cables link?

No. S2-8FB-MPOA-8DLCU is OS2 single-mode with MPO-8 APC, while M4-8FB-MPOU-8DLCU is OM4 multimode with MPO-8 UPC. The fiber type and MPO polish must match the connected transceivers and fiber path.

What cable lengths are available for S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU?

1m to 100m. The listed specification range applies to both MPO Harnesses Cables models, allowing length selection for rack, row, or patch-panel routing within that range.

Are S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU suitable for plenum cabling areas?

Yes. Both listed models use OFNP plenum-rated jackets. S2-8FB-MPOA-8DLCU uses a yellow jacket for OS2 single-mode fiber, and M4-8FB-MPOU-8DLCU uses a magenta jacket for OM4 multimode fiber.

Can AICPLIGHT help verify whether MPO Harnesses Cables match a planned breakout deployment before purchase?

Yes. Customers can contact AICPLIGHT before ordering to check the required fiber type, MPO polish, LC branch count, Type B polarity, and length against the planned 100G-to-4x25G or 40G-to-4x10G link.

MPO Harness Cables

2 Results

Sort by:

Hot
MPO-8 (Female APC) to 4x LC Duplex UPC OS2 Single Mode Elite Breakout Cable,8 Fibers, Type B,Plenum (OFNP) ,Yellow

S2-8FB-MPOA-8DLCU

In Stock Ready to Ship

US$51.00
Add to cart Request Quote
Hot
MPO-8 (Female UPC) to 4x LC Duplex UPC OM4 Multimode Elite Breakout Cable,8 Fibers, Type B,Plenum (OFNP) ,Magenta

M4-8FB-MPOU-8DLCU

In Stock Ready to Ship

US$35.00
Add to cart Request Quote

MPO Harness Cables Overview

The MPO Harness Cables category contains two 8-fiber Elite breakout cables for connecting parallel optical interfaces to duplex transceiver ports. The series includes one OS2 single-mode model and one OM4 multimode model, each using a female MPO-8 connector that divides into four LC duplex UPC branches. Both cables use Type B polarity, OFNP plenum-rated jackets, and length options from 1m to 50m. The connector configurations include an MPO-8 APC interface for the OS2 cable and an MPO-8 UPC interface for the OM4 cable, supporting 100G-to-4×25G and 40G-to-4×10G optical breakout links.

S2-8FB-MPOA-8DLCU is an 8-fiber OS2 single-mode Elite harness with one female MPO-8 APC connector breaking out to four LC duplex UPC connectors. It uses Type B polarity, a yellow OFNP plenum-rated jacket, and is available in lengths from 1m to 50m. The cable supports optical breakout connections from a 100G QSFP28 module to four 25G SFP28 modules or from a 40G QSFP+ module to four 10G SFP+ modules.

M4-8FB-MPOU-8DLCU is an 8-fiber OM4 multimode Elite harness configured with one female MPO-8 UPC connector and four LC duplex UPC branches. It features Type B polarity, a magenta OFNP plenum-rated jacket, and length options from 1m to 50m. This assembly connects a parallel optical transceiver interface to four duplex ports, including 100G QSFP28 to four 25G SFP28 modules and 40G QSFP+ to four 10G SFP+ modules.

How does the MPO Harness Cables category split an 8-fiber MPO interface into duplex LC connections?: It splits one female MPO-8 interface into four LC Duplex UPC branches. Each listed model uses 8 fibers and Type B polarity for parallel-to-duplex optical breakout connections.
What is the main difference between S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU?: The fiber type and MPO polish are different. S2-8FB-MPOA-8DLCU is OS2 single-mode with a female MPO-8 APC connector, while M4-8FB-MPOU-8DLCU is OM4 multimode with a female MPO-8 UPC connector.
Can S2-8FB-MPOA-8DLCU support QSFP28-to-SFP28 and QSFP+-to-SFP+ optical breakout links?: Yes. S2-8FB-MPOA-8DLCU supports 100G QSFP28 to 4x25G SFP28 or 40G QSFP+ to 4x10G SFP+ breakout links when the connected modules use compatible OS2 single-mode MPO and LC interfaces.
Can M4-8FB-MPOU-8DLCU be used for 100G or 40G multimode breakout connections?: Yes. M4-8FB-MPOU-8DLCU connects one female MPO-8 UPC parallel interface to four LC Duplex UPC branches for OM4 multimode 100G-to-4x25G or 40G-to-4x10G breakout links.
Can S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU be used interchangeably in the same MPO Harnesses Cables link?: No. S2-8FB-MPOA-8DLCU is OS2 single-mode with MPO-8 APC, while M4-8FB-MPOU-8DLCU is OM4 multimode with MPO-8 UPC. The fiber type and MPO polish must match the connected transceivers and fiber path.
What cable lengths are available for S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU?: 1m to 100m. The listed specification range applies to both MPO Harnesses Cables models, allowing length selection for rack, row, or patch-panel routing within that range.
Are S2-8FB-MPOA-8DLCU and M4-8FB-MPOU-8DLCU suitable for plenum cabling areas?: Yes. Both listed models use OFNP plenum-rated jackets. S2-8FB-MPOA-8DLCU uses a yellow jacket for OS2 single-mode fiber, and M4-8FB-MPOU-8DLCU uses a magenta jacket for OM4 multimode fiber.
Can AICPLIGHT help verify whether MPO Harnesses Cables match a planned breakout deployment before purchase?: Yes. Customers can contact AICPLIGHT before ordering to check the required fiber type, MPO polish, LC branch count, Type B polarity, and length against the planned 100G-to-4x25G or 40G-to-4x10G link.