We bulk ordered these harnesses for network upgrades across several regional stores. The polarity was consistent on every cable, so our field team did not have to double-check each one during setup.
MPO-8 (Female UPC) to 4x LC Duplex UPC OM4 Multimode Elite Breakout Cable,8 Fibers, Type B,Plenum (OFNP) ,Magenta
P/N: M4-8FB-MPOU-8DLCU SKU: 40602
US$35.00
Cable Types:
- S2-8FB-MPOA-8DLCU MPO-8 APC to 4x LC Duplex UPC,OS2
- M4-8FB-MPOU-8DLCU MPO-8 UPC to 4x LC Duplex UPC,OM4
Length:
1m (3ft)
3m (10ft)
5m (16ft)
10m (33ft)
15m (49ft)
20m (66ft)
30m (98ft)
40m (131ft)
50m (164ft)
Length Price Table
| Length | Price |
|---|---|
| 1m (3ft) | US$35.00 |
| 3m (10ft) | US$37.00 |
| 5m (16ft) | US$39.00 |
| 10m (33ft) | US$43.00 |
| 15m (49ft) | US$48.00 |
| 20m (66ft) | US$52.00 |
| 30m (98ft) | US$61.00 |
| 40m (131ft) | US$70.00 |
| 50m (164ft) | US$79.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- Plug-and-Play Installation
- Ultra-Low Insertion Loss
- 100G/400G/800G Transmission Support
- LSZH/OFNR Rated Sheath
- Optical Module Compatibility
- High-Density Cabling Systems
Specifications
| Connector A | MPO-8 UPC Female | Connector B | 4x Duplex LC UPC |
|---|---|---|---|
| Fiber Count | 8F to 4 x2F | Fiber Mode | OM4@50/125μm |
| Flame Rating | OFNP | Cable Outside Diametre | 3.0mm |
| Polarity | Type B | Attenuation | 2.3dB/km@850nm 0.6dB/km@1300nm |
| Insertion Loss | ≤0.35dB@MPO ≤0.20dB@LC | Return Loss | ≥20dB@MPO ≥30dBdB@LC |
| Operating Temperature | -10 to 70°C (14 to 158℉) | Storage Temperature | -20 to 70°C (-4 to 158℉) |
/
Certification
Compare Items
| MPO-8 (Female UPC) to 4x LC Duplex UPC OM4 Multimode Elite Breakout Cable,8 Fibers, Type B,Plenum (OFNP) ,Magenta |  MPO-8 (Female APC) to 4x LC Duplex UPC OS2 Single Mode Elite Breakout Cable,8 Fibers, Type B,Plenum (OFNP) ,Yellow | |
|---|---|---|
| Connector A | MPO-8 UPC Female | MPO-8 APC Female |
| Connector B | 4x Duplex LC UPC | 4x Duplex LC UPC |
| Fiber Count | 8F to 4 x2F | 8F to 4 x2F |
| Fiber Mode | OM4@50/125μm | OS2@9/125μm |
| Polarity | Type B | Type B |
| Attenuation | 2.3dB/km@850nm 0.6dB/km@1300nm | 0.35dB/km@1310nm 0.20dB/km@1550nm |
| Insertion Loss | ≤0.35dB@MPO ≤0.20dB@LC | ≤0.35dB@MPO ≤0.20dB@LC |
| Return Loss | ≥20dB@MPO ≥30dBdB@LC | ≥60dB@MPO ≥50dBdB@LC |
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
Why does the MPO side use 8 fibers instead of 12 fibers?
SR4 links use four transmit lanes and four receive lanes, so 8 active fibers are enough. MPO-8 avoids the unused fibers often seen in MPO-12 SR4 cabling.
Can this UPC cable connect to an APC-interface module?
No. This cable is UPC on both the MPO and LC ends, so it should be used with UPC multimode SR interfaces only.
What should I check when routing this OFNP breakout cable?
Confirm the plenum requirement, LC branch labels, polarity, and bend radius before installation. Avoid pulling on the LC breakout legs, especially in high-density patching areas.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionThe UPC end faces looked clean, and the links stayed stable with our existing modules. We mainly use them for intra-rack connections, and short high-speed runs have been trouble-free.
These AICPLIGHT jumpers went into server cabinets at our hosting facility, and the branch lengths are easy to manage. The harness looks much cleaner than a pile of separate duplex cords.