We installed these in a campus network closet to connect a few access switches. The cables don’t tangle easily, which makes tracing lines later a lot less annoying.
MPO-12 (Female UPC) to MPO-12 (Female UPC) OM3 Multimode Elite Trunk Cable, 12 Fibers, Type B, Plenum (OFNP), Aqua
P/N: M3-12FB-MPOU-MPOU SKU: 40404
US$9.00
Cable Types:
- S2-12FB-MPOA-MPOA MPO-12 APC,OS2
- M4-12FB-MPOA-MPOA MPO-12 APC,OM4
- M4-12FB-MPOU-MPOU MPO-12 UPC,OM4
- M3-12FB-MPOU-MPOU MPO-12 UPC,OM3
- M4-16F-MPOA-MPOA MPO-16 APC,OM4
Length:
1m (3ft)
3m (10ft)
5m (16ft)
10m (33ft)
15m (49ft)
20m (66ft)
30m (98ft)
40m (131ft)
50m (164ft)
100m (328ft)
Length Price Table
| Length | Price |
|---|---|
| 1m (3ft) | US$9.00 |
| 3m (10ft) | US$11.00 |
| 5m (16ft) | US$13.00 |
| 10m (33ft) | US$18.00 |
| 15m (49ft) | US$23.00 |
| 20m (66ft) | US$28.00 |
| 30m (98ft) | US$38.00 |
| 40m (131ft) | US$48.00 |
| 50m (164ft) | US$58.00 |
| 100m (328ft) | US$108.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- 0.25dB Low Insertion Loss
- 7.5mm Minimum Bend Radius
- OFNP Flame-Retardant Jacket
- Cabinet Switch Cascade Cabling
- 500+ Plug-and-Unplug Cycles
- IEC/TIA Standards Compliance
Specifications
| Connector A | MPO-12 UPC Female | Connector B | MPO-12 UPC Female |
|---|---|---|---|
| Fiber Count | 12F | Fiber Mode | OM3@50/125μm |
| Flame Rating | OFNP | Cable Outside Diametre | 3.0mm |
| Polarity | Type B | Attenuation | 2.3dB/km@850nm 0.6dB/km@1300nm |
| Insertion Loss | ≤0.35dB | Return Loss | ≥20dB |
| Operating Temperature | -10 to 70°C (14 to 158℉) | Storage Temperature | -20 to 70°C (-4 to 158℉) |
/
Certification
Compare Items
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
How far can this OM3 cable support 40G or 10G links?
For typical 850nm multimode links, OM3 supports up to 100m for 40G SR4 and up to 300m for 10G SR. Actual reach also depends on the transceiver and link loss budget.
Can I use this cable for 100G QSFP28 SR4?
Yes, if the 100G SR4 transceiver uses an MPO/UPC multimode interface. For OM3, the supported reach is usually shorter than OM4, so check the module datasheet before deployment.
Why does this cable use UPC connectors instead of APC?
UPC is widely used for standard multimode SR links such as 40G SR4 and 100G SR4. APC is more often required when the transceiver interface specifically calls for angled-polish MPO connectors.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionThe connector gives a clear click when it seats, which I really like. We swapped a few old cords during overnight maintenance, and the links came back up smoothly.
These AICPLIGHT jumpers are being used on a customer backup link, and several transfer tests came back clean. Nothing overhyped, just a practical cable that works.