We used it for breakout connections from an 800G switch to 200G ports, and the port mapping was easy to follow. This AICPLIGHT batch lit up on the first try, saving us troubleshooting time.
MTP-8 APC Female to 2 × MTP-4 APC Female OM4 Multimode Fiber Optic Breakout Cable, 8 Fibers, Plenum (OFNP), Magenta
US$98.00
Product Highlights
- US Conec MTP®High-performance fiber links
- 0.35dB Low LossMaintains signal integrity
- 7.5mm Bend RadiusEasy cable routing
- 8° APC EndfaceLower reflections
- OFNP Plenum JacketDurable protection
- Transceiver LinksFlexible module links
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Specifications
| Connector A | MTP-8 APC Female | Connector B | 2x MTP-4 APC Female |
|---|---|---|---|
| Fiber Count | 8F to 2 x4F | Fiber Mode | OM4@50/125μm |
| Flame Rating | OFNP | Cable Outside Diametre | 3.0mm |
| Polarity | Generic | Attenuation | 2.3dB/km@850nm 0.6dB/km@1300nm |
| Insertion Loss | ≤0.35dB | Return Loss | ≥45dB |
| Operating Temperature | -10 to 70°C (14 to 158℉) | Storage Temperature | -20 to 70°C (-4 to 158℉) |
Certification
Compare Items
M4-8F-MTPA-2MTPA | S2-8F-MTPA-2MTPA | M4-16F-MTPA-2MTPA | M4-16F-MTPA-2MTPU | |
|---|---|---|---|---|
| Connector A | MTP-8 APC Female | MTP-8 APC Female | MTP-16 APC Female | MTP-16 APC Female |
| Connector B | 2x MTP-4 APC Female | 2x MTP-4 APC Female | 2x MTP-8 APC Female | 2x MTP-8 UPC Female |
| Fiber Count | 8F to 2 x4F | 8F to 2 x4F | 16F to 2 x8F | 16F to 2 x8F |
| Fiber Mode | OM4@50/125μm | OS2@9/125μm | OM4@50/125μm | OM4@50/125μm |
| Polarity | Generic | Generic | Generic | Generic |
| Attenuation | 2.3dB/km@850nm 0.6dB/km@1300nm | 0.35dB/km@1310nm 0.20dB/km@1550nm | 2.3dB/km@850nm 0.6dB/km@1300nm | 2.3dB/km@850nm 0.6dB/km@1300nm |
| Insertion Loss | ≤0.35dB | ≤0.35dB | ≤0.35dB | ≤0.35dB |
| Return Loss | ≥45dB | ≥60dB | ≥45dB | ≥20dB |
Resources
FAQ
Find answers to common product questions, or ask our technical team.
Is this cable suitable for multimode SR applications?
Yes, if the modules use OM4 multimode fiber and require MTP/APC interfaces. Always check the module’s fiber count, polish type, and lane mapping before deployment.
Are the two MTP-4 branches two separate links?
They can be used as two separate optical paths when the transceiver and switch configuration support that breakout mapping. Each branch should follow the required port and lane assignment.
What should I confirm before customizing this breakout cable?
Confirm the MTP-8 to 2×MTP-4 fiber mapping, branch length, A/B labels, polarity, APC interface, and OFNP jacket requirement. Clear branch labeling is especially important in dense AI cluster racks.
Ask a Product Question
Send your question to our technical team. We'll review it before it appears on this page.
Customer Reviews
Write a ReviewThe cable length and breakout layout fit our rack well. We had no polarity problems when connecting to the SR2 modules, and the setup went better than expected.
This cable met our expectations. We can use two cables to link an 800G SR8 setup to four 200G SR2 modules, and the test went smoothly with no link issues.





