Request a Quote CART
English
Active copper breakout cable from one 800G OSFP finned-top connector to four 200G QSFP112 connectors

800G OSFP Finned Top to 4 x 200G QSFP112 Active Copper Breakout Cable

P/N: O800-4Q200-AC SKU: 33104

US$791.00

In Stock: 91 pcs
Compatible Brands: MSA Standard NVIDIA(InfiniBand)
Length: 3m (10ft) 4m (13ft) 5m (16ft)
Quantity:
  • 30-day return and refund service icon 30-day return and refund
  • 3-year warranty service icon 3-year warranty
  • available for delivery within 2 days service icon Available for delivery within 2 days
  • free shipping for qualifying orders service icon Free shipping for orders over

Products Highlight

  • 1.7W OSFP End Power
  • 0.3W QSFP112 End Power
  • 8×100G to Quad 2×100G PAM4
  • Built-in Redriver Signal Compensation
  • 32.5mm Minimum Bend Radius
  • QSFP112 MSA Compliance

Specifications

Connector Type OSFP(Finned Top) to 4x QSFP112 Data Rate 850Gbps to 4x 212.5Gbps
Media Copper Cable Type ACC
Cable Length 3m~5m(10ft~16ft) Outer Diameter 3m@AWG 30 4m~5m@AWG 26
Jacket Material PVC Minimum Bend Radius 23mm@AWG 30 32.5mm@AWG 26
Power Consumption ≤1.7W @800G ≤0.3W @200G Case Operating Temperature 0 to 70°C (32 to 158°F)
Protocol 4x 200G Breakout Ethernet 4x 200G RoCE 4x 200G Infiniband NDR200 Application Switch to NIC

Applications

Certification

Features

COMPATIBILITY

ALL TRADEMARKS, REGISTERED COMPANIES & REFERENCES CITED ARE THE SOLE PROPERTY OF THEIR RESPECTIVE COMPANY AND ARE USED SOLELY TO ASSIST IN THE IDENTIFICATION OF PRODUCTS.

  • NVIDIA/Mellanox MCA7J75-N004 COMPATIBLE

Switch Series & Supported Models

Browse common switch series and models supported for each brand.

Resources

FAQ

Ask a Question

Find answers to common questions about our products.

Can the four 200G branches connect to four different servers?

Yes. Each QSFP112 branch can connect to a separate 200G NIC or DPU port. They still share the same parent 800G switch port, so the switch must run the correct 4×200G breakout mode.

If I only use three branches and leave one unplugged, will the other links work?

Yes. Once breakout is configured, each branch operates as an independent logical port. An unused branch will normally remain down or disabled and should not affect the connected branches.

When should I choose this 4×200G QSFP112 ACC instead of another breakout cable?

Choose this cable when the switch side is 800G OSFP and the server side needs four 200G QSFP112 connections. If your server ports are 400G, OSFP-based, or require a longer optical reach, a different breakout cable or optical solution may be more appropriate.

Have a question? Our technical support team is here to help you find the right solution.
Contact Us

Questions & Answers Title

Ask a question
P***r Confirmed Purchase
5.0

We first considered DAC, but the distance was a bit awkward. This cable solved the issue directly and was much simpler than using modules.

K***n Confirmed Purchase
4.0

This AICPLIGHT cable worked well for our high-bandwidth connection. Traffic testing looked clean, so we felt pretty confident using it.

H***w Confirmed Purchase
4.5

We used it instead of a module-and-fiber setup, and installation was easier. So far, it gives us a good balance between performance and cost.