Switch Series & Supported Models
Browse common switch series and models supported for each brand.
800G OSFP Finned Top to 2x 400G QSFP112 Active Electrical Breakout Cable
P/N: O800-2Q400-AE SKU: 33302
US$1,125.00
Compatible Brands:
MSA Standard
NVIDIA(InfiniBand)
Length:
5m (16ft)
6m (20ft)
7m (23ft)
Length Price Table
| Length | Price |
|---|---|
| 5m (16ft) | US$1,125.00 |
| 6m (20ft) | US$1,152.00 |
| 7m (23ft) | US$1,421.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- InfiniBand NDR System Qualified
- 8x100G PAM4 Breakout Architecture
- Built-in Retimer Chips
- 12W Max at 800G End
- 7.5W Max at 400G End
- 26.5mm Minimum Bend Radius
Specifications
| Connector Type | OSFP(Finned Top) to 2x QSFP112 | Data Rate | 850Gbps to 2x 425Gbps |
|---|---|---|---|
| Media | Copper | Cable Type | AEC |
| Cable Length | 5m~7m(16ft~23ft) | Outer Diameter | AWG 28 |
| Jacket Material | PVC | Minimum Bend Radius | 38mm |
| Power Consumption | ≤12W @800G ≤10W @400G | Case Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocol | 2x 400G Breakout Ethernet 2x 400G RoCE 2x 400G Infiniband NDR | Application | Switch to NIC |
Applications
Certification
Features
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
Where is this 800G OSFP to 2x400G QSFP112 AEC normally used?
It is typically used to connect one 800G OSFP switch port to two 400G QSFP112 ports on NICs or DPUs in AI, HPC, and high-density server access environments.
Does the 800G switch port need to support breakout mode?
Yes. The host device must support and be configured for 2x400G breakout mode before the two QSFP112 branches can operate as independent 400G links.
Why choose an AEC breakout cable instead of a passive DAC?
An AEC uses active signal conditioning and retiming to improve signal integrity, making it suitable for 5m to 7m short-reach copper links where passive DAC may not provide enough margin.
Can this cable replace optical modules for short 800G-to-400G links?
Yes. Within the supported reach, it can reduce the need for optical modules and fiber patch cords, helping lower cost, power consumption, and cabling complexity.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionWe tested the cable right after receiving it, and the link came up quickly. Build quality looks good, and the connectors feel solid.
The length was just right for our rack cabling. It has been running for a few days with no drops, more stable than expected.
Used it to replace an older DAC, and the link recovered quickly. It has been running smoothly so far with no obvious errors.