COMPATIBILITY
ALL TRADEMARKS, REGISTERED COMPANIES & REFERENCES CITED ARE THE SOLE PROPERTY OF THEIR RESPECTIVE COMPANY AND ARE USED SOLELY TO ASSIST IN THE IDENTIFICATION OF PRODUCTS.
- NVIDIA MCP7H50-V001R30 COMPATIBLE
200G QSFP56 to 2x 100G QSFP56 Passive Direct Attach Copper Breakout Cable
P/N: Q200-2Q100-C SKU: 32301
US$65.00
Compatible Brands:
MSA Standard
NVIDIA(Ethernet)
Length:
1m (3ft)
2m (7ft)
3m (10ft)
Length Price Table
| Length | Price |
|---|---|
| 1m (3ft) | US$65.00 |
| 2m (7ft) | US$74.00 |
| 3m (10ft) | US$104.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- 200G to 2x100G Interoperability
- 0.5W Max Power Consumption
- 30mm Minimum Bend Radius
- QSFP56 MSA Compliant
- Low Insertion Loss
- Ultra-low Crosstalk
Specifications
| Connector Type | QSFP56 to 2x QSFP56 | Data Rate | 212.5Gbps to 2x 106.25Gbps |
|---|---|---|---|
| Media | Copper | Cable Type | DAC |
| Cable Length | 1m~3m(3ft~10ft) | Outer Diameter | 1m@AWG 30 1.5m~3m@AWG 26 |
| Jacket Material | PVC | Minimum Bend Radius | 23mm@AWG 30 33mm@AWG 26 |
| Power Consumption | ≤0.1W | Case Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocol | 2x 100G Breakout Ethernet 2x 100G Breakout Infiniband HDR | Application | Swicth to Switch Switch to NIC Router to NIC Other Links |
Applications
Certification
Features
Switch Series & Supported Models
Browse common switch series and models supported for each brand.
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
Can this 200G breakout DAC run at 100G or 40G, or is it only for 200G?
This cable is designed for 200G to 2×100G breakout connections. Speed fallback depends on whether the switch port, NIC port, and breakout configuration support the target rate, so it should be verified against the host devices.
Is a 200G QSFP56 breakout DAC the same as a QSFP-DD breakout DAC?
No. QSFP56 and QSFP-DD are different form factors, so the cable must match the physical port type on the equipment. A QSFP-DD port may support some QSFP form factors in certain cases, but compatibility should still be confirmed before deployment.
Do I need to enable breakout mode on the switch?
Yes. The 200G switch port must support and be configured for 2×100G breakout mode; otherwise, the two 100G branches may not link up correctly.
What length should I choose, and what if I need a longer connection?
Passive DAC is best for short links, commonly 0.5m, 1m, 2m, or 3m depending on the application. For longer runs or tighter signal-margin requirements, AEC or AOC may be a better choice.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionThe length was just right, and cable routing in the rack was easier than expected. Packaging was solid too, with no visible damage.
Bought this to replace a shorter DAC, and it does the job well. The connectors fit smoothly, and it is fine for short-distance links.
Our engineer installed it and ran a few quick checks, everything looked normal. For the price, the quality feels pretty good.