40G QSFP+ DAC
1 Results
40G QSFP+ DAC Overview
The 40G QSFP+ DAC category contains one passive direct attach copper twinax cable for short-distance 40G Ethernet connections. Q40-Q40-C uses 40G QSFP+ connectors at both ends to create a direct link between compatible network ports and is available in lengths from 0.5m to 5m. Compliant with IEEE 802.3ba and QSFP MSA specifications, the cable is designed for high-speed connections within a data center rack or between adjacent racks, including links between switches, servers, and other QSFP+-equipped network devices.
| Model | End A Form Factor | End A Data Rate | End B Form Factor | End B Data Rate | Length |
|---|---|---|---|---|---|
| Q40-Q40-C | 1x QSFP+ | 40G | 1x QSFP+ | 40G | 0.5~5m |
FAQ
What type of connection does Q40-Q40-C provide between two network devices?
A direct 40 Gigabit Ethernet connection. Q40-Q40-C has a 40G QSFP+ connector at each end and links two compatible QSFP+ ports without dividing the connection into lower-speed branches.
What cable lengths are available for Q40-Q40-C, and where are they intended to be deployed?
From 0.5m to 5m. These passive copper lengths are intended for short-distance connections within the same data center rack or between adjacent racks, including switch-to-switch and switch-to-server links.
Can Q40-Q40-C break one 40G QSFP+ port into four 10G SFP+ connections?
No. Q40-Q40-C is a straight-through QSFP+ to QSFP+ cable and maintains one 40G connection between its two ends. A QSFP+ to 4x SFP+ breakout cable has a different connector configuration.
Does Q40-Q40-C require separate optical transceivers or fiber patch cables?
No. Q40-Q40-C is an integrated passive twinax copper assembly with QSFP+ connectors already attached at both ends. It plugs directly into compatible 40G QSFP+ ports without separate optical modules or fiber cabling.
How does Q40-Q40-C carry a 40Gb/s Ethernet signal through its QSFP+ interfaces?
It uses four parallel electrical lanes. Under the 40GBASE-CR4 architecture defined for IEEE 802.3ba, each lane operates at a nominal signaling rate of 10.3125 GBd to support the complete 40Gb/s Ethernet link.
Can AICPLIGHT check whether Q40-Q40-C will work with a specific switch, server, or network adapter?
Yes. Customers can provide the exact equipment model and QSFP+ port information to AICPLIGHT for a compatibility check before ordering Q40-Q40-C.