COMPATIBILITY
ALL TRADEMARKS, REGISTERED COMPANIES & REFERENCES CITED ARE THE SOLE PROPERTY OF THEIR RESPECTIVE COMPANY AND ARE USED SOLELY TO ASSIST IN THE IDENTIFICATION OF PRODUCTS.
- NVIDIA/Mellanox MCP7Y40-N002 COMPATIBLE
800G OSFP Finned Top to 4 x 200G QSFP112 Passive Direct Attach Copper Breakout Cable
P/N: O800-4Q200-C SKU: 31904
US$170.00
Compatible Brands:
MSA Standard
NVIDIA(Ethernet)
Length:
0.5m (1.6ft)
1m (3ft)
1.5m (5ft)
2m (7ft)
3m (10ft)
Length Price Table
| Length | Price |
|---|---|
| 0.5m (1.6ft) | US$170.00 |
| 1m (3ft) | US$188.00 |
| 1.5m (5ft) | US$206.00 |
| 2m (7ft) | US$224.00 |
| 3m (10ft) | US$269.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- 0.1W Per-End Power Consumption
- 8x100G-PAM4 to 4x200G Breakout
- NVIDIA SN5600/NIC Compatibility
- 31mm Minimum Bend Radius
- OSFP/QSFP112 MSA Compliant
- IEEE 802.3ck Compliant
Specifications
| Connector Type | OSFP(Finned Top) to 4x QSFP112 | Data Rate | 850Gbps to 4x 212.5Gbps |
|---|---|---|---|
| Media | Copper | Cable Type | DAC |
| Cable Length | 1m~3m(3ft~10ft) | Outer Diameter | 1m~3m@AWG 28 |
| Jacket Material | PVC | Minimum Bend Radius | 25mm@AWG 28 |
| Power Consumption | ≤0.1W | Case Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocol | 4x 200G Breakout Ethernet 4x 200G RoCE 4x 200G Infiniband NDR200 | Application | Switch to NIC |
Applications
Certification
Features
Switch Series & Supported Models
Browse common switch series and models supported for each brand.
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
Can AICPLIGHT cables be used together with original vendor cables in the same switch?
Yes. AICPLIGHT high-speed cables are designed to follow industry specifications and can interoperate with original cables when the port type, speed, and breakout mode match.
If I only use three of the four breakout ends, will the unused branch affect the others?
No. After the 800G port is split into 4×200G logical ports, each branch works independently. An unused branch will not normally affect the active links.
Do I need to configure the switch port before using this breakout cable?
In most cases, yes. The 800G OSFP port needs to be set to 4×200G breakout mode so that each QSFP112 branch can be recognized as an independent 200G link.
When should I choose this passive DAC instead of an active copper cable or AOC?
This passive DAC is a good choice for short, low-power, low-latency rack-level connections. For longer copper reach, an active copper cable may be more suitable; for longer optical links, transceivers with breakout fiber are usually preferred.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionThe cable feels well made and was detected right away. We use it for short in-rack links, and it has been stable so far
This AICPLIGHT cable saves more space than our previous setup. Routing was easy, and the test results matched what we expected.
The packaging and labels were clear, so installation did not take long. With the right length, the cabling looks much cleaner.