COMPATIBILITY
ALL TRADEMARKS, REGISTERED COMPANIES & REFERENCES CITED ARE THE SOLE PROPERTY OF THEIR RESPECTIVE COMPANY AND ARE USED SOLELY TO ASSIST IN THE IDENTIFICATION OF PRODUCTS.
- NVIDIA MFA7U10-H003 (980‑9I41X‑00H003) COMPATIBLE
400G OSFP Finned Top to 2x 200G QSFP56 InfiniBand HDR Active Optical Breakout Cable
P/N: O400-2Q-HDR-A SKU: 30402
US$809.00
Compatible Brands:
MSA Standard
NVIDIA(InfiniBand)
Length:
1m (3ft)
5m (16ft)
10m (33ft)
15m (49ft)
20m (66ft)
30m (98ft)
50m (164ft)
Length Price Table
| Length | Price |
|---|---|
| 1m (3ft) | US$809.00 |
| 5m (16ft) | US$844.00 |
| 10m (33ft) | US$867.00 |
| 15m (49ft) | US$889.00 |
| 20m (66ft) | US$912.00 |
| 30m (98ft) | US$957.00 |
| 50m (164ft) | US$1,047.00 |
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- InfiniBand End-to-End Qualification
- 2×4×50G PAM4 Breakout
- NVIDIA QM9700/QM9790 Compatible
- IBTA Industrial BER Tested
- 30mm Minimum Bend Radius
- CMIS 4.0 Compliance
Specifications
| Connector Type | OSFP(Finned Top) to 2x QSFP56 | Data Rate | 425Gbps to 2x 212.5Gbps |
|---|---|---|---|
| Media | Fiber | Cable Type | AOC |
| Cable Length | 1m~50m(3ft~165ft) | Outer Diameter | 3.0mm |
| Jacket Material | OFNP | Minimum Bend Radius | 30mm |
| Power Consumption | ≤10.0W@OSFP ≤4.5W@QSFP56 | Case Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocol | 2x 200G Breakout Ethernet 2x 200G RoCE 2x 200G Breakout Infiniband HDR | Application | Swicth to Switch Switch to NIC Other Optical Links |
Applications
Certification
Features
Switch Series & Supported Models
Browse common switch series and models supported for each brand.
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
Can I use this AICPLIGHT cable together with existing NVIDIA/Mellanox InfiniBand cables in the same QM9700 or QM9790 deployment?
Yes. This AICPLIGHT cable is designed for standard InfiniBand environments and can be used alongside original IB cables when the switch port mode, device firmware, and link speed are properly matched.
What type of connection is this OSFP to 2×QSFP56 breakout AOC mainly designed for?
It is mainly used to connect a 400G OSFP switch port to two 200G QSFP56 HDR ports. Typical use cases include connecting NDR-class OSFP switch ports to HDR switches, HDR NICs, or compatible DPU ports.
If I only connect one QSFP56 branch and leave the other branch unused, will the active branch still work?
Yes. After the OSFP port is configured in split mode, each QSFP56 branch works as an independent logical port. The unused branch will not affect the connected branch.
Can the QSFP56 splitter ends run at EDR speed?
No. The QSFP56 splitter ends are intended for 200G HDR connections. They are not designed for EDR-rate operation.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionThis AICPLIGHT high-speed cable was plug and play with our switches. After running for a while, both temperature and link status have remained normal.
Overall, it performs well for short-reach high-speed connections. Shipping was fine, and the port came up quickly after installation.
I was a little concerned about compatibility with our existing gear, but it worked smoothly once connected. The cable is flexible enough, which made rack routing easier.