US$699.00
30-day return and refund
3-year warranty
Available for delivery within 2 days
Free shipping for orders over
| Form Factor | OSFP(Finned Top) | Data Rate | 850Gbps |
|---|---|---|---|
| Media | MMF | Wavelength | 850nm |
| Connector | Dual MTP/MPO-12 APC | Distance | 30m@OM3 50m@OM4 |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| Electrical Modulation | 8x 106.25 PAM4 | Optical Modulation | Dual 4x 106.25 PAM4 |
| Power Consumption | ≤16.0W | Case Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocol | 800 Gigabit Ethernet 800G RoCE | Application | Switch to Switch Switch to NIC Other Optical Links |
ALL TRADEMARKS, REGISTERED COMPANIES & REFERENCES CITED ARE THE SOLE PROPERTY OF THEIR RESPECTIVE COMPANY AND ARE USED SOLELY TO ASSIST IN THE IDENTIFICATION OF PRODUCTS.
Browse common switch series and models supported for each brand.
| Series | Compatible Switch Models (Examples) |
|---|---|
| Spectrum-4 | SN5600 (920-9N42F-00RI-7C0)SN5600D (920-9N42F-00RI-KC0)SN5610 (920-9N42F-00RI-3C1) |
| 800GBASE 2xSR4/SR8 OSFP Finned Top PAM4 850nm 50m DOM Dual MTP/MPO-12 APC MMF Optical Transceiver Module |  800GBASE 2xDR4/DR8 OSFP Finned Top PAM4 1310nm 500m DOM Dual MTP/MPO-12 APC SMF Optical Transceiver Module |  800GBASE 2xFR4/FR8 OSFP Finned Top PAM4 1310nm 2km DOM Dual Duplex LC/UPC SMF Optical Transceiver Module | |
|---|---|---|---|
| Form Factor | OSFP(Finned Top) | OSFP(Finned Top) | OSFP(Finned Top) |
| Data Rate | 850Gbps | 850Gbps | 850Gbps |
| Connector | Dual MTP/MPO-12 APC | Dual MTP/MPO-12 APC | Dual Duplex LC UPC |
| Distance | 30m@OM3 50m@OM4 | 500m | 2km |
| Electrical Modulation | 8x 106.25 PAM4 | 8x 106.25 PAM4 | 8x 106.25 PAM4 |
| Optical Modulation | Dual 4x 106.25 PAM4 | Dual 4x 106.25 PAM4 | Dual 4x 106.25 PAM4 |
| Power Consumption | ≤16.0W | ≤16.5W | ≤16.5W |
Find answers to common questions about our products.
Yes. This module can support two 400G SR4 links when used with the correct dual MTP/MPO-12 multimode fiber cabling and compatible 400G SR4 modules.
Yes, if the optical protocol, lane rate, fiber type, and connector mapping match. The host ports must also support the corresponding OSFP or QSFP112 form factor.
SR8 usually refers to one 800G link using 8 optical lanes. 2xSR4 is structured as two independent 400G SR4 links, each using 4 optical lanes.
Use multimode MTP/MPO-12 APC fiber cables with the correct polarity and lane mapping. For two 400G SR4 links, two MTP/MPO-12 paths are typically required.
Not always. QSFP112 ends must be used with QSFP112 ports, while OSFP ends must be used with OSFP ports; the host device type, such as NIC, DPU, or switch, should be checked before deployment.
The module was detected right away with no extra tuning needed. After running for a while, the link stayed stable and performed as expected.
We used it for an 800G to 2x400G connection, and the rollout was smoother than expected. This AICPLIGHT module has good compatibility and the link has not dropped once.
We installed it in our existing rack for testing, and the DOM readings looked normal. Temperature stayed steady too, so overall it was an easy purchase.
