COMPATIBILITY
ALL TRADEMARKS, REGISTERED COMPANIES & REFERENCES CITED ARE THE SOLE PROPERTY OF THEIR RESPECTIVE COMPANY AND ARE USED SOLELY TO ASSIST IN THE IDENTIFICATION OF PRODUCTS.
- NVIDIA/Mellanox MMA1B00-B150D COMPATIBLE
40GBASE-SR4 QSFP+ 40G 850nm 150m DOM MTP/MTP/MPO-12 UPC MMF Optical Transceiver Module
P/N: QSFP-40G-SR4 SKU: 21501
US$29.00
Transceiver Models:
- QSFP-40G-SR4 850nm 150m
- QSFP-40G-LR4 1310nm 10km
Compatible Brands:
Alcatel-Lucent
Arista
Brocade
Check Point
Chelsio
Ciena
Cisco
D-Link
Dell
Edge Core
Extreme Networks
F5 Networks
Fortinet
HPE Aruba
Huawei
Intel
Juniper
MSA Standard
NVIDIA(InfiniBand)
Palo Alto Networks
Length:
150m
Quantity:
-
30-day return and refund
-
3-year warranty
-
Available for delivery within 2 days
-
Free shipping for orders over
Products Highlight
- Built-in Macom Chip
- ≤1.5W Max Power Consumption
- Hot-Swappable QSFP+ Form Factor
- SFF-8436 Compatible Interface
- IEEE 802.3ba 40GBASE-SR4
- DDM Diagnostic Monitoring Support
Specifications
| Form Factor | QSFP+ | Data Rate | 41.25Gbps |
|---|---|---|---|
| Media | MMF | Wavelength | 850nm |
| Connector | MTP/MPO-12 UPC | Distance | 100m@OM3 150m@OM4 |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| Electrical Modulation | 4x 10.3125G NRZ | Optical Modulation | 4x 10.3125G NRZ |
| Power Consumption | ≤1.5W | Case Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocol | 40 Gigabit Ethernet 4x 10G Breakout Ethernet | Application | Swicth to Switch Switch to NIC Router to NIC Other Optical Links |
Applications
Certification
Features
Switch Series & Supported Models
Browse common switch series and models supported for each brand.
| Series | Compatible Switch Models (Examples) |
|---|---|
| ConnectX-3 | MCX313A-BCBTMCX314A-BCBTMCX313A-BCCTMCX314A-BCCTMCX345A-BCPNMCX345A-BCQNMCX346A-BCPNMCX346A-BCQNMCX353A-QCBTMCX354A-QCBTMCX353A-FCBTMCX354A-FCBTMCX354A-FCCT |
Compare Items
| 40GBASE-SR4 QSFP+ 40G 850nm 150m DOM MTP/MTP/MPO-12 UPC MMF Optical Transceiver Module |  40GBASE-LR4 QSFP+ 40G 1310nm 10km DOM Duplex LC/UPC SMF Optical Transceiver Module | |
|---|---|---|
| Form Factor | QSFP+ | QSFP+ |
| Data Rate | 41.25Gbps | 44.8Gbps |
| Connector | MTP/MPO-12 UPC | Duplex LC UPC |
| Distance | 100m@OM3 150m@OM4 | 10km |
| Electrical Modulation | 4x 10.3125G NRZ | 4x 11.2G NRZ |
| Optical Modulation | 4x 10.3125G NRZ | 4x 11.2G NRZ |
| Power Consumption | ≤1.5W | ≤3.5W |
Resources
FAQ
Ask a QuestionFind answers to common questions about our products.
Is this a good choice for a 30m link inside a data center?
Yes. A 30m multimode link is well within the reach of 40G SR4. Use a suitable OM3 or OM4 MPO-12/UPC multimode cable and make sure both ends are configured for 40G operation.
What cable should I use between two 40G SR4 modules?
Use an MPO-12/UPC multimode fiber cable, typically OM3 or OM4. Because 40G SR4 uses parallel optical lanes, the MPO polarity and lane mapping must be correct.
Is 40G SR4 the same as QSFP-4×10G-SR?
No. A standard 40G SR4 module is mainly designed for native 40G QSFP+ links, while QSFP-4×10G-SR is specifically designed for 4×10G breakout applications. They may look similar, but the intended use and optical power behavior can be different.
Can this 40G SR4 module be used for 4×10G breakout?
Only use it for breakout if the host device and module specification explicitly support that mode. For stable 4×10G connections to SFP+ SR ports, a dedicated QSFP-4×10G-SR breakout module is usually the safer choice.
Have a question?
Our technical support team is here to help you find the right solution.
Contact Us
Questions & Answers Title
Ask a questionThese AICPLIGHT modules worked well, and the price was fair. We installed them in a few switches, and all are running fine so far.
Shipping was pretty fast, and the packaging was better than expected. The module works fine with no compatibility issues.
It has been stable on our existing 40G link. DOM readings look normal, and the temperature stays within a good range.