| M4-12FB-MPOU-MPOU-1 |  M3-12FB-MPOU-MPOU-1 |  S2-12FB-MPOA-MPOA-1 | M4-12FB-MPOA-MPOA-1 | M4-16F-MPOA-MPOA-1 | |
|---|---|---|---|---|---|
| Connector A | MPO-12 UPC Female | MPO-12 UPC Female | MPO-12 APC Female | MPO-12 APC Female | MPO-16 APC Female |
| Connector B | MPO-12 UPC Female | MPO-12 UPC Female | MPO-12 APC Female | MPO-12 APC Female | MPO-16 APC Female |
| Fiber Count | 12F | 12F | 12F | 12F | 16F |
| Fiber Mode | OM4@50/125μm | OM3@50/125μm | OS2@9/125μm | OM4@50/125μm | OM4@50/125μm |
| Flame Rating | OFNP | OFNP | OFNP | OFNP | OFNP |
| Cable Outside Diametre | 3.0mm | 3.0mm | 3.0mm | 3.0mm | 3.0mm |
| Polarity | Type B | Type B | Type B | Type B | Generic |
| Attenuation | 2.3dB/km@850nm 0.6dB/km@1300nm | 2.3dB/km@850nm 0.6dB/km@1300nm | 0.35dB/km@1310nm 0.20dB/km@1550nm | 2.3dB/km@850nm 0.6dB/km@1300nm | 2.3dB/km@850nm 0.6dB/km@1300nm |
| Insertion Loss | ≤0.35dB | ≤0.35dB | ≤0.35dB | ≤0.35dB | ≤0.35dB |
| Return Loss | ≥20dB | ≥20dB | ≥60dB | ≥20dB | ≥20dB |
| Operating Temperature | -10 to 70°C (14 to 158℉) | -10 to 70°C (14 to 158℉) | -10 to 70°C (14 to 158℉) | -10 to 70°C (14 to 158℉) | -10 to 70°C (14 to 158℉) |
| Storage Temperature | -20 to 70°C (-4 to 158℉) | -20 to 70°C (-4 to 158℉) | -20 to 70°C (-4 to 158℉) | -20 to 70°C (-4 to 158℉) | -20 to 70°C (-4 to 158℉) |
Ask a questionWhat is the average power consumption of this transceiver?
by v***m on 2025-09-21 13:54:08
The average power consumption varies by model, but it typically ranges between 3W to 12W.
by AICPLIGHT on 2025-09-22 02:16:48
Helpful 0 
Comment 0Do these cables support 100Gbps per lane?
by 4***m on 2025-08-10 23:22:34
Yes, some models support up to 100Gbps/lane.
by AICPLIGHT on 2025-08-11 01:35:34
Helpful 0 Comment 0Is this product designed for enterprise LANs?
by g***m on 2025-05-11 13:22:55
Yes, lower speed modules are ideal for LAN and campus networks.
by AICPLIGHT on 2025-05-12 11:12:25
Helpful 0 Comment 0Can these transceivers auto-negotiate with older models?
by m***m on 2025-05-03 20:29:38
Yes, backward compatibility is supported in many cases.
by AICPLIGHT on 2025-05-04 04:45:59
Helpful 0 Comment 0How should cables be routed in a high-density rack?
by E***m on 2024-12-19 21:26:02
Use cable managers to maintain airflow and prevent bending.
by AICPLIGHT on 2024-12-20 06:03:06
Helpful 0 Comment 0 Write a reviewEach cable was individually bagged, labeled, and tested. The clean, well-organized packaging saved us hours during install.
Helpful 0 Comment 0These cables matched polarity perfectly with our existing system, avoiding any complex re-routing or crossover errors.
Helpful 0 Comment 0Excellent value when compared to building custom LC networks—saved both time and rack space.
Helpful 0 Comment 0Tested with multiple vendor transceivers including QSFP-40G-SR4 and 100G SR4 optics—fit and function were flawless.
Helpful 0 Comment 0Support offered personalized guidance for matching MTP cable lengths with cassettes and breakout designs.
Helpful 0 Comment 0We needed help choosing the correct polarity type, and their team provided diagrams and fiber maps within 24 hours.
Helpful 0 Comment 0Pre-terminated ends made patching into structured cabling panels extremely efficient.
Helpful 0 Comment 0Services
Products Warranty
Payment Methods
Shipping and Delivery
Return Policy
Privacy and Cookies
WhatsApp: +86 185 0273 2643
Email: [email protected]
Address: No. 6885, Unit 1, Building 1, No. 33 Guangshun North Street, Chaoyang District, Beijing, China
English
We used MTP-24 cables for a 100G spine-leaf architecture. Signal integrity remained excellent even at the farthest reach, and insertion loss values were well.