 S2-2F-LCU-LCU-1 | M4-2F-LCU-LCU-1 | M3-2F-LCU-LCU-1 | |
|---|---|---|---|
| Connector A | Duplex LC UPC | Duplex LC UPC | Duplex LC UPC |
| Connector B | Duplex LC UPC | Duplex LC UPC | Duplex LC UPC |
| Fiber Count | 2F | 2F | 2F |
| Fiber Mode | OS2@9/125μm | OM4@50/125μm | OM3@50/125μm |
| Flame Rating | OFNR | OFNR | OFNR |
| Cable Outside Diametre | 2.0mm | 2.0mm | 2.0mm |
| Polarity | A to B | A to B | A to B |
| Attenuation | 0.4dB/km@1310nm 0.3dB/km@1550nm | 3.5dB/km@850nm 1.5dB/km@1300nm | 3.5dB/km@850nm 1.5dB/km@1300nm |
| Insertion Loss | ≤0.3dB | ≤0.3dB | ≤0.3dB |
| Return Loss | ≥50dB | ≥30dB | ≥30dB |
| Operating Temperature | -10 to 70°C (14 to 158℉) | -10 to 70°C (14 to 158℉) | -10 to 70°C (14 to 158℉) |
| Storage Temperature | -20 to 70°C (-4 to 158℉) | -20 to 70°C (-4 to 158℉) | -20 to 70°C (-4 to 158℉) |
Ask a questionIs this cable compatible with hp procurve switches?
by V***m on 2025-08-31 11:36:13
If you have an LC compatible SFP module it should work no problem.
by AICPLIGHT on 2025-08-31 14:06:57
Helpful 0 
Comment 0When I was looking through this product's specifications, I saw "tight-buffered" mentioned in the product title. Could you explain the advantages of choosing a tight-buffered product?
by u***m on 2025-07-04 08:54:20
A tight-buffered product refers to a fiber optic cable construction where each individual fiber is surrounded by its own protective buffer or coating. This construction provides an additional layer of protection to the fiber, shielding it from environmental factors such as moisture, dust, and physical damage. This makes the cable more durable and reliable, especially in harsh or demanding environments. Besides, it makes the cable more resistant to kinking and bending, allowing for easier handling and installation. You can read this encyclopedia to learn more about the benefits.
by AICPLIGHT on 2025-07-04 12:27:39
Helpful 0 Comment 0Does this cable work in a 1G installation?
by O***m on 2025-07-02 15:08:20
Yes, it will work in a 1G installation. It supports 1000BASELX, etc.
by AICPLIGHT on 2025-07-02 21:30:56
Helpful 0 Comment 0My customer asks if it is possible to protect the connectors when installing many jumpers at the same time. Could he use dust caps or pulling eyes to protect them?
by X***m on 2025-06-30 09:13:18
Dust caps and pulling eyes. Our fiber connectors all come with dust caps by default, designed to protect the end face from being scratched or contaminated. Pulling eyes are wrapped around the connector and mainly used for long cable routing. It helps cables pass through tight areas and can avoid direct contact of the connector with the external environment.
by AICPLIGHT on 2025-06-30 16:58:12
Helpful 0 Comment 0Does this cable work in a 1G installation?
by C***m on 2025-06-25 08:40:24
Yes, it will work in a 1G installation. It supports 1000BASELX, etc.
by AICPLIGHT on 2025-06-25 22:41:58
Helpful 0 Comment 0When I was looking through this product's specifications, I saw "tight-buffered" mentioned in the product title. Could you explain the advantages of choosing a tight-buffered product?
by u***m on 2025-05-18 22:55:14
A tight-buffered product refers to a fiber optic cable construction where each individual fiber is surrounded by its own protective buffer or coating. This construction provides an additional layer of protection to the fiber, shielding it from environmental factors such as moisture, dust, and physical damage. This makes the cable more durable and reliable, especially in harsh or demanding environments. Besides, it makes the cable more resistant to kinking and bending, allowing for easier handling and installation. You can read this encyclopedia to learn more about the benefits.
by AICPLIGHT on 2025-05-19 09:17:53
Helpful 0 Comment 0 Write a reviewI have implemented single-mode patch cables in our company's network architecture. I highly recommend single-mode patch cables, especially for applications that require high-speed and long-distance transmission capabilities.
Helpful 0 Comment 0I have implemented single-mode patch cables in our company's network architecture. I highly recommend single-mode patch cables, especially for applications that require high-speed and long-distance transmission capabilities
Helpful 0 Comment 0I have implemented single-mode patch cables in our company's network architecture. I highly recommend single-mode patch cables, especially for applications that require high-speed and long-distance transmission capabilities.
Helpful 0 Comment 0The bend-insensitive performance provides great convenience and flexibility, allowing me to easily handle various challenges in complex network wiring environments.
Helpful 0 Comment 0The bend-insensitive performance provides great convenience and flexibility, allowing me to easily handle various challenges in complex network wiring environments.
Helpful 0 Comment 0Got the gear and it all installed perfectly this morning. Thanks for your help and speedy shipping!
Helpful 0 Comment 0The bend-insensitive performance provides great convenience and flexibility, allowing me to easily handle various challenges in complex network wiring environments.
Helpful 0 Comment 0Services
Products Warranty
Payment Methods
Shipping and Delivery
Return Policy
Privacy and Cookies
WhatsApp: +86 185 0273 2643
Email: [email protected]
Address: No. 6885, Unit 1, Building 1, No. 33 Guangshun North Street, Chaoyang District, Beijing, China
English
The fiber is used between two managed network switches - one backstage and one at FOH location. The fiber minimizes any concern of potential losses due to distances, and performs flawlessly.